Product Description
Specification:
| Product Name |
4-200mm Diameter Steady Quality PTFE Rod And Sheet PTFE bar,PTFE gasket,PTFE tube. |
| Material |
PTFE (polytetrafluoroethylene) |
| Size |
4-200mm |
| Length |
1000mm, or custom size |
| Color |
White, black,or customized |
| Certificate |
RoHS, SGS test report |
| Formation Way |
Molded,Extrusion,drawbench |
| OEM & ODM |
Available |
| Types |
Gasket,washer,Rods ,sheets ,Tube |
| MOQ |
500kgs per color per specification per item (no MOQ requirement on stocks) |
| Advantage |
One stop procurement |
1>PTFE Gasket
One of the most chemically-resistant materials available, PTFE and expanded ePTFE can fit the bill for extreme sealing with sheet gasketing, gasket tape, joint sealant, and universal gasket configurations. In addition to resisting most chemicals, the expanded PTFE gaskets are outstanding at resisting creep and cold flow. There are also gaskets created specifically for low bolt load, or for use in sealing fragile pipe flanges.
Sealing Devices offers a complete line of Gore PTFE gasketing materials and joint sealants.
2> Main technical parameter
(1)Material: 100% expanded PTFE
(2)Temperature range: -450°F to 600°F (-268°C to 315° C)
(3)Chemical resistance: Resistant to all media in the 0-14 pH range, except molten alkali metals and elemental fluorine, particularly at elevated temperatures and pressures
(4)Operating pressure: Vacuum to 3000 psig (200 bar)
(5)Safety: Complies with FDA 21 CFR 177.1550 (PTFE) food requirements
(6)Compressibility: ASTM F-36 57 percent
(7)Sealability: Y value 1500 psi, m factor 2.4
PTFE gasket washer,rod,bar,tubes,capillary sleeve,PTFE sheet panel:
Product Description:
PTFE parts
PolyTetraFluoroEthylene is a fluorocarbon-based polymer and is commonly abbreviated PTFE.
it offers high chemical resistance,low and high temperature capability,resistance to weathering,
low friction, electrical and thermal insulation.
PTFE's mechanical properties are low compared to other plastics,but its mechanical properties can be enhanced
by adding fillers such as glass fibers,carbon,graphite,molybdenum disulphide,and bronze.
Material Introduction:
PTFE molded sheet,gasket,rod bar,extrustion tubes is manufactured by molding method with PTFE granular resin.
In fluoroplastics, PTFE got the most consumption and was used widely.
It's an important material in variety of fluoroplastics.
PTFE exhibits astonishing chemical resistance.
This self-lubricating material provides a low friction coefficient,
and is ideally suited for the manufacture of corrosion-resistant gaskets & seals.
Feature Characteristics:
1.High and low temperature resistance(-180ºC~+260 ºC)
2.Corrosion resistance(strong acid, strong alkali and aqua regia etc)
3.Weather resistance Anti-aging
4.High insulation
5.High lubrication
6.Anti-flaming
Advantages:
1.Superior endurance in corrosion
2.Non-flammable,limited oxygen index is under 90.
3.Low friction coefficient
4.Non-viscous, Self-lubricating
5.Superior endurance in high & low temperature, can be used -180~260ºC
6.High electrical insulation
7.Atmospheric aging resistance
8.Low permeability, good gas barrier property
9.Good physiological compatibility and anti-thrombotic
Applications:
1.Corrosion resistance: widely used in all chemical containers and parts which contacted
with corrosive media,such as tanks,reactors,equipment lining,valves,pumps,fittings,
filter materials,separation materials and pipe for corrosive fluids.
2.Abrasion resistance: can be used as a self lubricating bearing,piston rings,seal rings,
gaskets,valve seats,sliders,rails and lubricating materials in corrosive media etc.
3.Insulation materials: mainly used in the manufacture of various products with high temperature resistance,
high-frequency resistance, electrical insulation and arc resistance, such as high-frequency cables,
moisture-resistant cables, capacitor coils, insulating cover for wire, etc..
4.Medical materials: such as artificial blood vessels,heart,esophagus,peritoneum,heart devices,Bearings,valves,
chemical piping,lining in the electrical,aerospace,machinery fields,a variety of intubation tubes and catheters.
5.Non-stick materials: can be used for non-stick coating such as non-stick pan and non-stick roller for food processor.
Support slider etc.
Packaging & Shipping
Packing:25kgs each plastics composite sack.
Company Profile
Our Advantages
FAQ
Q1. Can you provide OEM & ODM service?
A: Yes.
Q2. What's your Trading Term ,Payment Term?
A: 1)EXW,FOB, CFR or CIF.
2)T/T or L/C at sight by production order,accept Western Union or Paypal for sample freight.
Q3. Is the samples free?
A: Sample is Free, but the freight will refund you when your big order.
Q4. What's your MOQ?
A: 1 PC is available to our company,but the freight cost for unit price will be very high.
Q5. Can we print our own logo or brand on the products?
A: Welcome, you can send your own design of LOGO, we can make new mold and print or label any LOGO for you.
Q6. What's your nearby sea port?
A: Shanghai or Ningbo port in China.
Q7. What's carrier in your plastic industry?
A: PE,PP,PBT,PET,PA,PS,PC,PVC,ABS,EVA,TPE,TPU,TPR,TPV,PLA etc.
Q8. What's material of your rubber?
A: HNBR,NBR,NR,FKM,EPDM,SIR,PU,ACM,FVMQ,SBR,CR,IIR and so on.
Audited Supplier 
){kind=link}