| Customization: | Available |
|---|---|
| Material: | Non-Porous Rubber, Rubber |
| Usage: | Automobile, Machinery, Doors & Windows |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
General description of waterstop tape:
waterstop is a hydrophilic rubber waterstop that swells upon contact with water to prevent water infiltration
through cast-in-place concrete construction joints subjected to continuous or intermittent hydrostatic pressure.
It is easy to install and functionally replaces conventional passive PVC dumbbell waterstops.
waterstop is also ideal for industrial projects that may require an elevated level of chemical compatibility
for long term performance.
Hydrophilic waterproof rubber water stop strip for concret joints is an absorbent strip used to seal
and waterproof concrete joints. It is commonly made of natural sodium bentonite clay and synthetic rubber.
Both the modified synthetic rubber and the bentonite expand in the joint when exposed to moisture.
It is a new type of waterproof material, water stop, waterproof effect is more reliable than ordinary rubber.
In contact with water the waterstop strip will swell approximately 150%-600 % of its original dry volume,
the expansive clay mass will seal the cracks and small voids in the joint.
Application:
PN bentonite rubber waterstop, is widely used in swimming pools, waste water / sewer solution projects,
underground railway, tunnels, culverts, buildings etc, in the construction joints, expansion joints and cracks
of concrete constructions. It is designed for water stop / waterproof of concrete joints.
--dams, locks, canals, water reservoirs and aqueducts
--bridge and deck abutments, dry dock
--promary and secondary containment structures
--storage tanks
--slabs-on-grade
--retaining walls
--foundation
--parking garages
[The physical properties of the water stop material ]
| No | Items | B | S | J | |
| 1 | Hardness(SHAO ER A) | 60±5 |
60±5 |
60±5 |
|
| 2 | Breaking ength MPa | ≥15 | ≥12 | ≥10 | |
| 3 | Elongation at break,% | 380 | 380 | 300 | |
| 4,Constant pressure permanent deformation |
70ºC×24h(%) | ≤35 | ≤35 | ≤35 | |
| 23ºC×168h(%) | ≤20 | ≤20 | ≤20 | ||
| 5 | Brittleness temperature(ºC) | ≤-45 | ≤-40 | ≤-40 | |
| 6 | Air aging 70ºC×168h |
Hardness change(degree) | ≤+8 | ≤+8 | / |
| Strength rate low(%) |
≥12 | ≥10 | / | ||
| Elongation rate reduce (%) |
≥300 | ≥300 | / | ||
| Length(mm) | Width(mm) | Thickness(mm) |
| 5000 | 20 | 25 |
| Standard Specifications:1.Section Size:20mmX25mm;2.lLength:5.0m/roll;3.Package:10rolls/box. Size bias:Length is within specification value±1%,width and thickness is within specification value±1%.Other special specification and size is confirmed by two sides. |
||
| Items | Index | ||
| Common | Slow-swelling | ||
| Anti-water pressure,Mpa≥ | 1.5 | 2.5 | |
| Water welling rate in specified time/% | 4h | 200-250 | ---- |
| 24h | ---- | 200-250 | |
| 48h | |||
| 72h | |||
| 96h | |||
| 120h | |||
| 144h | |||
| Maximum water swelling ratio/% ≥ | 400 | 300 | |
| Density,g/cm3 | 1.6±0.1 | 1.4±0.1 | |
| Heat resisitance | 80°C,2h | ---- | No flow |
| 150°C,2h | No flow | ---- | |
| Low temperature flexibility | -20°C,2h circleΦ20mm Rods | ---- | No crack |
| -35°C,2h circleΦ20mm Rods | No crack | ---- | |
| Water resistance | Soak 24h | No mud | ---- |
| Soak 240h | ---- | Overrall expansion,no fragments | |
| Items | Index | ||
| Common | Slow-swelling | ||
| Anti-water pressure,Mpa≥ | 1.5 | 2.5 | |
| Water welling rate in specified time/% | 4h | 200-250 | ---- |
| 24h | ---- | 200-250 | |
| 48h | |||
| 72h | |||
| 96h | |||
| 120h | |||
| 144h | |||
| Maximum water swelling ratio/% ≥ | 400 | 300 | |
| Density,g/cm3 | 1.6±0.1 | 1.4±0.1 | |
| Heat resisitance | 80°C,2h | ---- | No flow |
| 150°C,2h | No flow | ---- | |
| Low temperature flexibility | -20°C,2h circleΦ20mm Rods | ---- | No crack |
| -35°C,2h circleΦ20mm Rods | No crack | ---- | |
| Water resistance | Soak 24h | No mud | ---- |
| Soak 240h | ---- | Overrall expansion,no fragments | |
Installation and Notes
1. To clear the debris, dross and dust, etc before installing the waterstop and keep the base dry;
2. The waterstop must be fixed with nails or adhesive on the surface of the central position, make sure not fall off;
3. The overlap joints of the waterstop must be parallel connection and form a closed, not leaving the breakpoint;
4. The storage and transport of the waterstop avoid moisture, extrusion, deformation;
5. The package box cantains detailed installation instructions, the construction must follow the instruct.
Packing:25kgs each plastics composite sack.
Q1. Can you provide OEM & ODM service?
A: Yes.
Q2. What's your Trading Term ,Payment Term?
A: 1)EXW,FOB, CFR or CIF.
2)T/T or L/C at sight by production order,accept Western Union or Paypal for sample freight.
Q3. Is the samples free?
A: Sample is Free, but the freight will refund you when your big order.
Q4. What's your MOQ?
A: 1 PC is available to our company,but the freight cost for unit price will be very high.
Q5. Can we print our own logo or brand on the products?
A: Welcome, you can send your own design of LOGO, we can make new mold and print or label any LOGO for you.
Q6. What's your nearby sea port?
A: Shanghai or Ningbo port in China.
Q7. What's carrier in your plastic industry?
A: PE,PP,PBT,PET,PA,PS,PC,PVC,ABS,EVA,TPE,TPU,TPR,TPV,PLA etc.
Q8. What's material of your rubber?
A: HNBR,NBR,NR,FKM,EPDM,SIR,PU,ACM,FVMQ,SBR,CR,IIR and so on.
){kind=link}